New Products
Home > New Products
AutoWypes Static Reducing Tack Cloth System
The best and only tack rag system especially developed to remove not only dust, but static as well. Static charges on vehicles and especially plastic and fiberglass items can yank dust right out of the air onto the surface you just tacked. Use Step 1 as a normal prep-wipe to get the bulk of the dust; then follow that with the SRW (Static Reducing Wiper) and clean up that surface like never before. When used properly (light pressure), there is no resin transfer. Step 2 is even safe to use on fresh basecoat! For more information, click here. You can also watch the video!
3M Quick-Disconnect Buffing System
3M introduces their Quick-Disconnect Buffing System. An adapter screws onto a standard 5/8"-11 thread buffer, which then allows the wool or foam double-sided pad (that's right - the first double-sided FOAM pad) to quickly snap in place and start buffing or polishing! The foam pads can be cleaned with a special bristle brush pad cleaning tool and the wool pads have a built-in red line wear indicator: if you buff until you can see the red line, it's time to change the pad. Each pad is always perfectly centered, so you get no off-center "wobble" as can occur with a Hookit pad, and no chance of "fly-off". Everything is included in a special introductory kit, which saves you a little more than 30% over buying the items individually.
Everyone's heard of Feather Fill, right? Not this Feather Fill. If you have been frustrated with polyester primers before, it's probably because it's hard to measure with those little tubes and oh by the way, it set up in your gun! What if it was easier to measure and had a longer pot life? Feather Fill 4:1 is just that. Although not a bare metal pimer (pre-prime with one coat acid etch or epoxy), Feather Fill easily competes with the heaviest build urethane primers and is ready to sand in 60-90 minutes. Want to know more? Read up on this tech sheet.